ltbenji
New Member
- Joined
- Jun 22, 2011
- Messages
- 89
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Make / Model
- Ford
- Engine Size
- 2.3
- Transmission
- Manual
I was under my truck changing the oil and noticed that the drivers side sway bar bushing was freely sliding along the bar. So I did the smart thing and went and ordered the parts...but when they came in they were wrong. I have spent time at the parts stores measuring and trying to find the correct part but nothing has been found.
The truck is a 88 2WD MT 2.3 Ext Cab
I have tried Moog K8656 and Moog K8684
The 56 had the right inner diameter but was much too small for the mounting bracket. The 84 was the wrong inner diameter.
I am completely lost as what to look for.
Finially, here is the part number off of the original bushing between the radius arm and the bar
E37A-5K486-AA
Pictures posted below
The truck is a 88 2WD MT 2.3 Ext Cab
I have tried Moog K8656 and Moog K8684
The 56 had the right inner diameter but was much too small for the mounting bracket. The 84 was the wrong inner diameter.
I am completely lost as what to look for.
Finially, here is the part number off of the original bushing between the radius arm and the bar
E37A-5K486-AA
Pictures posted below
Last edited: