raggedyann
New Member
- Joined
- Feb 20, 2013
- Messages
- 87
- Reaction score
- 1
- Points
- 0
- Vehicle Year
- 1998
- Make / Model
- ford
- Transmission
- Automatic
1990 2.9 ranger
I can set the timing with my timing light and get it right on the 10 degree mark but the valves chatter too bad unless I back it down about an inch from the mark.
Yes, I unplugged the spout wire when using the timing light.
I cant think what would cause this rather than too much play in dist. shaft ??
I can set the timing with my timing light and get it right on the 10 degree mark but the valves chatter too bad unless I back it down about an inch from the mark.
Yes, I unplugged the spout wire when using the timing light.
I cant think what would cause this rather than too much play in dist. shaft ??