- Joined
- Nov 16, 2008
- Messages
- 15,061
- Reaction score
- 197
- Points
- 0
- Age
- 37
- Location
- Honduras
- Vehicle Year
- 2003
- Make / Model
- Mitsubishi/Ford
- Engine Size
- 3.0/2.3
- My credo
- Fortune Favors the Brave
i did the heads on a friends truck and they turned out really nice.
and its not that hard. just make sure u dont bunr your fingers.
just preheat the oven and dont put them inside for too long, 2 or 3 minutes will do for the gasket to release the lens. do one at the time.
and when removing the masking tape do it with plenty water so u wont peel off the chrome on the non painted parts.
and its not that hard. just make sure u dont bunr your fingers.
just preheat the oven and dont put them inside for too long, 2 or 3 minutes will do for the gasket to release the lens. do one at the time.
and when removing the masking tape do it with plenty water so u wont peel off the chrome on the non painted parts.