MrGiggles
New Member
- Joined
- Jun 28, 2016
- Messages
- 50
- Reaction score
- 1
- Points
- 0
- Vehicle Year
- 1998
- Make / Model
- Ford
- Transmission
- Automatic
I bought a 98 Ranger XLT last night with the 2.5l and 5 speed.
It runs well enough going down the road, but it doesn't seem to idle right. Sometimes when you pull it out of gear, it will stumble, and it takes a little bit for the idle to settle down. It had an IAC code when I checked it before the drive home, but I cleared it and it hasn't come back.
I unplugged the IAC with the truck running and it ran exactly the same. Does this mean the IAC is not working or dirty?
It is also setting a P0171 code, and the LTFT are around 20%. I think this is caused by a vacuum leak somewhere.
I also noticed that the TPS is sitting at 16% at idle. Out of adjustment or normal?
It runs well enough going down the road, but it doesn't seem to idle right. Sometimes when you pull it out of gear, it will stumble, and it takes a little bit for the idle to settle down. It had an IAC code when I checked it before the drive home, but I cleared it and it hasn't come back.
I unplugged the IAC with the truck running and it ran exactly the same. Does this mean the IAC is not working or dirty?
It is also setting a P0171 code, and the LTFT are around 20%. I think this is caused by a vacuum leak somewhere.
I also noticed that the TPS is sitting at 16% at idle. Out of adjustment or normal?