Photo's Needed [Please Read] (Update 11/1/08)

[Ranger850]

15) Photos of a nice clean interior that features an Explorer overhead console conversion.

Bracket mounted for Explorer OverHead console with Compass and outside temp. You can see my first placement was too high

Wires ran and spliced

the Console

The Mirror

I thought I had a finished picture, but I cant find it at the moment. hopefully I will update this soon.

 

[Ranger850]

13) Photos of special features.

2wd Ranger Edge Front bumper removed. ( pay no attention to the XLT grill ) Shows the extra cross member that the tow hooks mount to.

2wd Ranger Edge rotors and front suspension ( need new bushings in this pic)

2wd Edge rear antisway bar axle mounts

passenger side

Driver's side

 

[cbxer55]

7.5 with Hellwi sway bar and Lakewood slappers.

 

[Ranger850]

The BIG 3. Red truck is '98-00. Yellow Truck is '01-03. White truck is '04-11.

 

[Roert42]

Square fog lights?

 

[Uncle Gump]

Pretty square... these are the take off's from my 06.

 

[Ranger850]

The BIG 3. Red truck is '98-00. Yellow Truck is '01-03. White truck is '04-11.
View attachment 72977

Don't forget the STX specific bumpers

 

[Roert42]

2011 w/o body colored front bumper, round fog lights.

 

[Ranger850]

Square fog lights?

2001- 2003 are round
2004- 2005 are square except stx which is round

2nd quote is from a very old thread, buried deep in the TRS trenches. It may go past the '04-05 MYs.

 

[Roert42]

For sure I do not have STX, I'm not sure about other appearance options.

Doing a quick search. Looks like most of the pictures showed round fog lights, or round holes.

Some had square looking ones like Gumps. All of the ones that had square ones were 4x4, but not all 4x4 had square ones.

 

[Lefty]

2003 Edge freshly painted with nerf style side steps, blackout headlights, retro polished aluminum wheels, and oversize cooper tires, a custom grill, and tow loops (mounted on either side of the license plate), and twin tail pipes.

 

[Bear in the woods]

Hey all,

I want to collect some new photos for visual references. I need people to start looking out for photo's, or more importantly take some photos of these things if you have them.

You can upload the photos in this forum.

What I Need:

1) Photos looking under a Ranger & Bronco II of a Ford 7.5-Inch rear axle.

Photos looking under a Ranger of a Ford 8.8 Inch rear axle.

This should be what a newbie would see if he/she looks under his/her truck to see what axle they have.

2) Photos looking under the front of a Ranger of a Dana 28 and Dana 35. Also photos looking from under the Ranger back towards the front so you can see the housing bolted to the axle beam.

3) Side by side comparisons of Dana 28 and Dana 35 axle shafts.

4) Side by side comparisons of stock 28-spline rear axle shafts and Explorer 31-spline 8.8 shafts. Especially looking straight down the shaft to compare teeth and diameter.

5) Photo's of factory stock Rangers (2wd & 4wd) going back to 1983 to give people an idea of what their old Ranger looked like when it came off the Ford lot.

6) Photos of a 83-88, 89-92, 93-97, and 98-present customized Rangers. Both 4wd and 2wd. Especially 2wd. We need to show people some nice clean custom Rangers. Especially lowered ones.

7) Stock Bronco II's (see #5 above)

8) Some nice custom (show worthy) Bronco II's.

9) Nice clean Bronco II with Bushwacker fender flares.

10) Full rear shot of an early Bronco II with opening rear glass in the rear hatch. Both opened and closed.

11) Scans or .pdf's of Ranger & Bronco II sales brochures.

12) Photos of a clean factory original dash for each generation of Ranger/Bronco II.

13) Photos of special features.

14) Photos of a Bronco II overhead console for the 4x4 switches.

15) Photos of a nice clean interior that features an Explorer overhead console conversion.

16) Photos of various Ranger models (not modified) such as Splash, Tremor, GT, Thunderbolt, Saleen, etc.

Multiple submissions are welcome. I'll weed through them. Bigger pics are better. All photos submitted may be used later in our publications.

I appreciate any help you can give.

Update 11/2/08:

I need pics of stock and lowered front suspensions. I want pics of both TTB and IFS front suspensions as well.

90 2.9

 

[Lefty]

2003 8.8" rear rear axel 2 wheel drive

 

[RandyOnR3]

Hey all,

I want to collect some new photos for visual references. I need people to start looking out for photo's, or more importantly take some photos of these things if you have them.

You can upload the photos in this forum.

What I Need:

1) Photos looking under a Ranger & Bronco II of a Ford 7.5-Inch rear axle.

Photos looking under a Ranger of a Ford 8.8 Inch rear axle.

This should be what a newbie would see if he/she looks under his/her truck to see what axle they have.

2) Photos looking under the front of a Ranger of a Dana 28 and Dana 35. Also photos looking from under the Ranger back towards the front so you can see the housing bolted to the axle beam.

3) Side by side comparisons of Dana 28 and Dana 35 axle shafts.

4) Side by side comparisons of stock 28-spline rear axle shafts and Explorer 31-spline 8.8 shafts. Especially looking straight down the shaft to compare teeth and diameter.

5) Photo's of factory stock Rangers (2wd & 4wd) going back to 1983 to give people an idea of what their old Ranger looked like when it came off the Ford lot.

6) Photos of a 83-88, 89-92, 93-97, and 98-present customized Rangers. Both 4wd and 2wd. Especially 2wd. We need to show people some nice clean custom Rangers. Especially lowered ones.

7) Stock Bronco II's (see #5 above)

8) Some nice custom (show worthy) Bronco II's.

9) Nice clean Bronco II with Bushwacker fender flares.

10) Full rear shot of an early Bronco II with opening rear glass in the rear hatch. Both opened and closed.

11) Scans or .pdf's of Ranger & Bronco II sales brochures.

12) Photos of a clean factory original dash for each generation of Ranger/Bronco II.

13) Photos of special features.

14) Photos of a Bronco II overhead console for the 4x4 switches.

15) Photos of a nice clean interior that features an Explorer overhead console conversion.

16) Photos of various Ranger models (not modified) such as Splash, Tremor, GT, Thunderbolt, Saleen, etc.

Multiple submissions are welcome. I'll weed through them. Bigger pics are better. All photos submitted may be used later in our publications.

I appreciate any help you can give.

Update 11/2/08:

I need pics of stock and lowered front suspensions. I want pics of both TTB and IFS front suspensions as well.

 

[mikkelstuff]

Gas hood struts: