nobb
New Member
- Joined
- Nov 7, 2010
- Messages
- 19
- Reaction score
- 0
- Points
- 1
- Vehicle Year
- 1994
- Make / Model
- Ford
- Transmission
- Manual
Hi guys,
I originally had a P0340 camshaft position sensor code pop up and the engine was shaking. Upon inspection, the synchronizer was good but the sensor cap seemed to have been contaminated with oil. I replaced the cap and all was good for a bit, but then the code popped up again (although the engine ran smooth this time). So I decided to replace the entire sensor and synchronizer with a brand new one. After a week, the same P0340 pops up again, but once again the engine runs smooth with no misfire at all (per my OBD scanner).
I'm completely stumped now. What else can I try to diagnose this further? Everything should be aligned properly and the engine runs completely smooth so I'm having a hard time figuring out what could be wrong.
Thanks!
I originally had a P0340 camshaft position sensor code pop up and the engine was shaking. Upon inspection, the synchronizer was good but the sensor cap seemed to have been contaminated with oil. I replaced the cap and all was good for a bit, but then the code popped up again (although the engine ran smooth this time). So I decided to replace the entire sensor and synchronizer with a brand new one. After a week, the same P0340 pops up again, but once again the engine runs smooth with no misfire at all (per my OBD scanner).
I'm completely stumped now. What else can I try to diagnose this further? Everything should be aligned properly and the engine runs completely smooth so I'm having a hard time figuring out what could be wrong.
Thanks!