pintobobster
Member
- Joined
- Jun 30, 2014
- Messages
- 81
- Reaction score
- 3
- Points
- 8
- Age
- 64
- Location
- Washington State
- Vehicle Year
- 1995
- Make / Model
- FORD
- Engine Size
- 4.0L
- Transmission
- Automatic
1995 ranger automatic 4X4 4.0L cruise control issues
speed control light has not worked since ive owned it, I have read posts on how to wire it to make it work, so I cannot do the self check at this time.
here are some issues and repairs to date, (may have forgot a few)?
issue
cruise just up and stopped working was working fine for 4 months then POOF NOTHING, (only have had for four months so gremlins are creeping up on me), all fuses are good, replaced both switches left and right on steering wheel, I have replaced cruise deactivation switch (twice and jumper) replace VSS on transmission, and ABS sensor on rear-end (why not they were cheap cost and i don't know what previous owners have done), opened up the servo no rust movement is good nothing sticking, cable moves freely to throttle, also checked all bulbs working fine
NOW
what I need and don't know is the trouble shooting the Voltages or resistance at connections or a good schematic to follow each wire, and what else could control the cruise to not work, I have a OBII code reader and it reads no codes, also I have a little electrical knowledge enough to trace issues, I have a good DMM, just lacking the knowledge to follow or trouble shoot or find a good diagram or schematic to trace
could some one with a lot more knowledge please assist me on this issue...
I miss my cruise and use it constantly ANY HELP is much appreciated
speed control light has not worked since ive owned it, I have read posts on how to wire it to make it work, so I cannot do the self check at this time.
here are some issues and repairs to date, (may have forgot a few)?
issue
cruise just up and stopped working was working fine for 4 months then POOF NOTHING, (only have had for four months so gremlins are creeping up on me), all fuses are good, replaced both switches left and right on steering wheel, I have replaced cruise deactivation switch (twice and jumper) replace VSS on transmission, and ABS sensor on rear-end (why not they were cheap cost and i don't know what previous owners have done), opened up the servo no rust movement is good nothing sticking, cable moves freely to throttle, also checked all bulbs working fine
NOW
what I need and don't know is the trouble shooting the Voltages or resistance at connections or a good schematic to follow each wire, and what else could control the cruise to not work, I have a OBII code reader and it reads no codes, also I have a little electrical knowledge enough to trace issues, I have a good DMM, just lacking the knowledge to follow or trouble shoot or find a good diagram or schematic to trace
could some one with a lot more knowledge please assist me on this issue...
I miss my cruise and use it constantly ANY HELP is much appreciated