- Joined
- Jun 14, 2008
- Messages
- 385
- Reaction score
- 1
- Points
- 0
- Location
- Wilmington, VT
- Vehicle Year
- (01) / [94] / {
- Make / Model
- Ford
- Engine Size
- [3.0L] | (4.0L) | {5.0L, sas 35 boggers}
- Transmission
- Automatic
ok as some of u know im building a wheelin truck and the only problem in suspension ive ran into is the rear.. i have no clue what i should do to get it to sit level..
as of right now i can see (even with stacked leafs) the rear end will sit lower than the front
so what im asking is, does anyone know what would be the easiest (without using blocks) to lift the rear end up more? or if theres a vehicle that has pretty bowed leafs?
cause what im aiming for is i would like to be able for the rear to flex, seeing as im not gonna be hauling anything with this thing, so im not gonna stack leafs.. i was thinkin of building my own drop shackle but i dont know how well that will work with flex
any input on this would help alot.
thanks
as of right now i can see (even with stacked leafs) the rear end will sit lower than the front
so what im asking is, does anyone know what would be the easiest (without using blocks) to lift the rear end up more? or if theres a vehicle that has pretty bowed leafs?
cause what im aiming for is i would like to be able for the rear to flex, seeing as im not gonna be hauling anything with this thing, so im not gonna stack leafs.. i was thinkin of building my own drop shackle but i dont know how well that will work with flex
any input on this would help alot.
thanks