LA2 computer pinned and installed,no start

[gabes2.3project]

okay so I just repinned my computer harness on the 90 ranger for 88 2.3t swap i had ran her earlier for a little while before this, after hooking up the LA2 i went to start her and kicked on for about 3 seconds then nothing since, i remember reading somewhere that when you do this swap u have to change the injectors to compensate for onhm, currently i have 4 injectors from a 93 2.5 in there but i also have the injectors from this engine(2.3t) set aside, i have pressure and spark but no fire and when it does its more like a burp/slight backfire, im gonna swap them out right now but just wanted to put this up there for when i come back cheers

 

[Duane867]

I'd say thats your problem.

Pics or this thread is useless !

 

[gabes2.3project]

well

haha i swapped the injectors and i went to start it up and then i remembered my mass air flow is unplugged i plugged it in and she roared i took her down to the mobil and got some gas and drove fine as long as the rpms were under 3, i think whats going on is my intake hoses are collapsing when i hit the throttle so ima hit up the hardware store tommorow and custom the intake with pvc and take it from there