redpatcher
New Member
- Joined
- Jun 28, 2017
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1999
- Make / Model
- Ford
- Transmission
- Manual
So here's the skinny. I recently bought a 1999 Ranger, V6, 5 Speed. The previous owner put manual hubs on it and since buying it, I've replaced the CV axles, axle bearings, and transfer case motor. I was having trouble with it shifting through 2, 4, and 4L, but after replacing the transfer case motor, that works properly now. However, I'm still not getting power to the front. I tested it on a hill after the swap and the rear wheels were spinning and the front were doing nothing. I'm not knowledgeable about vehicles at all, so I'm not sure what's going on with it. I'm pretty much learning as I go with this truck.
What else should I be looking for on this truck?
What else should I be looking for on this truck?