B2Guy
New Member
- Joined
- Jul 21, 2010
- Messages
- 410
- Reaction score
- 1
- Points
- 0
- Location
- Lafollette, TN
- Vehicle Year
- 1989
- Make / Model
- Ford
- Engine Size
- 2.9
- Transmission
- Automatic
I've always been toying around with the idea to chop the top off my bronco and well, I finally did it. I still have alot of work to do but I love the way its turned out so far.
After I took the top off I used it to cap the ends above the tail lights. I've never tried to weld this thin of metal and its a HUGE pain in the butt.
The plan is for now to put a 4 point cage in the back for now and either put on a ranger tail gate or make one up. I'm also going to do something with a soft top snap riveted on.
After I took the top off I used it to cap the ends above the tail lights. I've never tried to weld this thin of metal and its a HUGE pain in the butt.
The plan is for now to put a 4 point cage in the back for now and either put on a ranger tail gate or make one up. I'm also going to do something with a soft top snap riveted on.