askthemasses
Member
- Joined
- Jul 7, 2018
- Messages
- 89
- Reaction score
- 0
- Points
- 6
- Location
- Seattle, WA
- Vehicle Year
- 2000
- Make / Model
- ford
- Engine Size
- 3.0
- Transmission
- Automatic
OK. So I think I'm going with a 4" spindle (front) and 2" block (rear). Also want to get new 32s. I have new wheels sitting here in the box. I figure I should wait to mount the wheels until the lift is done, then do tires/wheels all at once? Doubt I can clear 32s on stock set up right now.
Also need new shocks- should be able to ride stock size in front but can't find info anywhere on whether or not 2" blocks will require different shock size in the rear.
If I can run stock shocks all around, I'll just replace those now- quick and easy. But if I need larger in back, I'll put that toward the end once the lift and tires and wheels are on...
Am I going about this right? Could 32s clear stock? Do I need new rear shocks?
So much info on this, but also so much conflicting info.
Also need new shocks- should be able to ride stock size in front but can't find info anywhere on whether or not 2" blocks will require different shock size in the rear.
If I can run stock shocks all around, I'll just replace those now- quick and easy. But if I need larger in back, I'll put that toward the end once the lift and tires and wheels are on...
Am I going about this right? Could 32s clear stock? Do I need new rear shocks?
So much info on this, but also so much conflicting info.