welderman85
Member
- Joined
- Dec 23, 2011
- Messages
- 30
- Reaction score
- 0
- Points
- 6
- Transmission
- Automatic
hi all. Im in the process of getting my 95 4.0 back on the road. The driver side doughnut gasket was junk,but every time I looked at the studs I got scared because I knew what was going to happen. there were really crusty. so I soaked them with pb blaster for a week or so the heated it good with the torch and just as I thought it took all of 2 seconds to twist them off. so now what. I know I have to pull the manifold but wahts the best way to go about this. . thank you