LittleHorse
New Member
- Joined
- Jan 22, 2009
- Messages
- 964
- Reaction score
- 1
- Points
- 0
- Location
- Pryor, OK
- Vehicle Year
- 1990
- Make / Model
- Ford
- Engine Size
- 2.9L
- Transmission
- Automatic
I got a pair for my Bronco II and just went to start installing them, and ran into some problems.
First - the lower lever that I had on the BII split bench that leaned and slid the seat forward for rear seat access is not present on the t-bird seats, so I'm having trouble figuring out what to hook up to in order to keep that functionality. As it is I only have it able to lean the seat back forward, the only sliding is done by the adjustment lever under the front of the seat. If this is all I'm going to get, it's a deal breaker for me and I may end up selling some t-bird seats and putting my 60/40 back in.
The second problem is the seat back is not locking. It's rocking back and forth as if released but I'm not pulling the lever. Seems like maybe the locking mechanism is gummed up or something. Is there a simple fix for this?
First - the lower lever that I had on the BII split bench that leaned and slid the seat forward for rear seat access is not present on the t-bird seats, so I'm having trouble figuring out what to hook up to in order to keep that functionality. As it is I only have it able to lean the seat back forward, the only sliding is done by the adjustment lever under the front of the seat. If this is all I'm going to get, it's a deal breaker for me and I may end up selling some t-bird seats and putting my 60/40 back in.
The second problem is the seat back is not locking. It's rocking back and forth as if released but I'm not pulling the lever. Seems like maybe the locking mechanism is gummed up or something. Is there a simple fix for this?