birdmanslopy
New Member
- Joined
- Oct 23, 2008
- Messages
- 113
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1994
- Make / Model
- Ford
- Transmission
- Manual
I read threw alot of stuff but didnt really get much info on it.
Ill be starting my swap late feburary and are getting the last bugs out before i start it.
what problems seem to come across, what do i do about power steering?
I wanna be ready for this and not be side swiped by something that will hold me back.
I picked up an auto computer even though there detuned ive heard, did a oem rebuild on the 2.3 with 8.1 pistons, manely rods, arp studs, cometic gasket, c-4 transmission, and detial zone wire harness with a volvo headswap on the top of the block to set things off.
what problems am i gonna run into putting this together in the truck?
is there ways to re route lines for power steering and a/c and stuff?
The motors an svo mustang motor and the year is 86 i think....
if i missed any curtial info lemme know and ill fill it in
Ill be starting my swap late feburary and are getting the last bugs out before i start it.
what problems seem to come across, what do i do about power steering?
I wanna be ready for this and not be side swiped by something that will hold me back.
I picked up an auto computer even though there detuned ive heard, did a oem rebuild on the 2.3 with 8.1 pistons, manely rods, arp studs, cometic gasket, c-4 transmission, and detial zone wire harness with a volvo headswap on the top of the block to set things off.
what problems am i gonna run into putting this together in the truck?
is there ways to re route lines for power steering and a/c and stuff?
The motors an svo mustang motor and the year is 86 i think....
if i missed any curtial info lemme know and ill fill it in