JordanHackworth
New Member
- Joined
- May 15, 2017
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Transmission
- Automatic
I'm swapping a 1999 Explorer 5.0 into a 2000 3.0 Flex Fuel Ranger and the exhaust runs right into a crossmember behind the transmission.
The Explorer doesn't have that crossmember, and instead has one that bolts in closer to the transmission. Without having looked too closely at it, it doesn't seem like the gas tank is bolted to the crossmember and it could be cut out and replaced with the one from the Explorer, assuming the rest of the exhaust is a complete bolt in.
Can anyone tell me what they've done with the exhaust from the transmission back?
Thanks!
The Explorer doesn't have that crossmember, and instead has one that bolts in closer to the transmission. Without having looked too closely at it, it doesn't seem like the gas tank is bolted to the crossmember and it could be cut out and replaced with the one from the Explorer, assuming the rest of the exhaust is a complete bolt in.
Can anyone tell me what they've done with the exhaust from the transmission back?
Thanks!