- Joined
- Mar 3, 2014
- Messages
- 405
- Reaction score
- 2
- Points
- 0
- Location
- Pagosa Springs CO>
- Vehicle Year
- 2000
- Make / Model
- ford
- Engine Size
- 4.0
- Transmission
- Automatic
- My credo
- live everyday like your gonna die tomorrow
I've looked all over and can't find information on how my 1354e operates to engage/disengage the front axle.I'm assuming the front end turns ALL the time, but I don't know?
This all started with me wanting to put manual hubs in place of what I thought I had [PVH].. so I guess my truck is one of the unlucky or not live axle models [built in june 2000].
Also, are live axles a good or bad thing ?I have looked at the tech articles and it reads you cannot put manual hubs on a live axle..
You'd think at my age I could figure this out...not
This all started with me wanting to put manual hubs in place of what I thought I had [PVH].. so I guess my truck is one of the unlucky or not live axle models [built in june 2000].
Also, are live axles a good or bad thing ?I have looked at the tech articles and it reads you cannot put manual hubs on a live axle..
You'd think at my age I could figure this out...not