mojoranger
New Member
- Joined
- Mar 13, 2009
- Messages
- 15
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1999
- Make / Model
- Ford
- Transmission
- Manual
I have a 1999 Ranger 4x4 with a 3.0 and the Mazda M50D-R1 behind it and am having an issue. When I first start driving after the trucks been sitting overnight it shifts fine but after driving about 10 miles or so it it wants to grind going into 2nd gear. If i shift it slow I can get it to engage with a little effort. I changed to fluid out last week and the clutch and slave cylinder were changed about 5000 miles ago. It just started doing this recently. I am wondering if a syncro going out would cause this problem and is there anything I can do other than pulling it and replacing parts. Thanks in advance for any help.
Mike
Mike