Whats the best slave cylinder?

[fordtrucknut77]

So I tried searching and cant seem to come up with any kind of common slave cylinder people are using for a v8 swap. so yea guys lets here it, which one works best?

 

[Iron Ranger]

What kind of tranny are you running? T-5 I assume?

I used this style:

But this one works just as well AND is much easier to work with than what I used

It's a little harder to push down on the clutch pedal, but it does release and let go of the clutch 100%

 

[Teddyzee]

Most of those Nissan/Datsun models are pretty interchangeable. Just pick and car from the 70's to early 80's, they all used them.

I used a slave form an '83/'84 ranger diesel. Gotta keep it Ford!

Mock up:

 

[Iron Ranger]

^^ Those are from a Ford Probe.

 

[fordtrucknut77]

ok thanks guys, and im running a np435 if it matters

 

[fordtrucknut77]

what year/model is that lower one from iron ranger?

 

[Iron Ranger]

http://www.napaonline.com/Search/Detail.aspx?A=NNC37902_0222046717&An=599001+101992+50026+2026027

Here's the link to the lower one. Not sure what it goes on, but it should work for your truck.

 

[fordmike1]

I used a slave form an '83/'84 ranger diesel. Gotta keep it Ford!
[/IMG]

Amen to that brother . There is nothing but FORD parts on all of my FORDs.
Even wire connectors that come on aftermarket things with them shitty ole GM weather pak crap connectors get cut off and factory FORD connectors get put on,