What did you do to your Ranger today? (Part Deux!)

[Blmpkn]

1990 is different panels. The 93?-11 panels with manual locks and windows rarely had a storage pouch. Usually only doors with power windows got the little pocket.

Damn.. my 98 had manual doors with the pockets. If I knew they were so rare I would of kept them before scrapping the truck last year

 

[Roert42]

I hate you. I have never found the elusive manual door panels with storage pockets in 5 years of searching.

I have some on my red truck. You can’t have them, but they are there.

I think you need to find an XLT with manual windows. Mine is an XLT with manual windows and locks.

 

[ThatOneGuy]

Last night after work I droped the 4.0 heads off at the machine shop, and if they are good he is gonna do all the things to them, so here's to hoping I don't have to buy another set.

 

[lil_Blue_Ford]

1990 is different panels. The 93?-11 panels with manual locks and windows rarely had a storage pouch. Usually only doors with power windows got the little pocket.

My first 00 was manual with those pockets. It was an XLT though

 

[Dirtman]

So I just need to add a T and I'll have door pockets?

 

[Curious Hound]

1990 is different panels. The 93?-11 panels with manual locks and windows rarely had a storage pouch. Usually only doors with power windows got the little pocket.

So, my door panels are rare?

They also have broken clips and rattle any time the truck moves.

 

[Roert42]

So, my door panels are rare?

They also have broken clips and rattle any time the truck moves.

Extra Rare.

 

[Chapap]

Extra Rare.

Huh, I didn’t think door pockets would have been a selling point. I got em on my XLT

 

[Dirtman]

Well woopidity doo for all of you with your fancy doors!

 

[Chapap]

Well woopidity doo for all of you with your fancy doors!

 

[RustyShackleford94]

Same. I had them in my 95 and ive seen at least 2 sets on fb. One set came with clean red doors for $150, the other set was $60 but i didnt want to pay that much for manual door panels lol.

 

[Hoonin88]

Ordered guage pod for a 2nd gen to install on my first gen so boost and oil pressure isn't rolling around on the dash anymore.

 

[Blmpkn]

Ordered guage pod for a 2nd gen to install on my first gen so boost and oil pressure isn't rolling around on the dash anymore.

BOOOOOOOOOOST? engine pics plz, details too.

 

[Hoonin88]

‘88 turbo coupe. Nothing fancy done but would like to fix a bunch of small things to make it more bulletproof

 

[scotts90ranger]

You need to ditch that filter and currogated hose setup, it can't be helping... and I haven't heard anything good about spectre filters... My setup isn't fantabulous but it's worked for years...

That was a long time ago but it's a factory filter box from a 2.9L pre MAF Ranger so it had a hose barb on the lid instead of a MAF flange, I grabbed the intake tube from the junkyard too to cut up to fit my needs... I scabbed a mount for the VAM out of some 1/8" aluminum I found that attaches to the battery box. The splice in the upper elbow part where it's just two rubber hoses clamped together does have a short piece of PVC on the inner piece that's angled on both sides so it's not a restriction. I have a K&N filter in the box since I had it around... the stock filter box is the same filter used on a 4.0L so it "should" be a reasonable amount of air, and since I used the stock intake ducting in front of the radiator it's still getting cold air. I should put a vacuum gauge on the inlet of the turbo to see if it is a restriction...

You can also see my conversion upper hose to use V6 radiators, I'm pretty sure that's the original 1990 upper hose... I just cut it in half and put a copper elbow in the middle... works great

I am curious if the intercooler helps at all, I bet it does something... I have one somewhere, I should put it in mine...