Switching from worn 35s to 32s

[oranjvoodoodaddy]

Hi folks,

I got a '94 4x4 on a 6in. Skyjacker kit. Anyone got pictures of the same setup with 32x11.5r15s? I'm thinking the tires will look small and wanna see if I can tolerate it.

Thanks for looking

 

[Dirtman]

Take the tires that are on your truck now, and from the center of the hub measure out 16" and draw a circle in chalk around your current tire.

Then take a step back and look at it.

I know its not what you want but it gives you perspective.

 

[Uncle Gump]

Most 32 inch tires only stand 31.5 inches tall.

The gear are you running should also be considered.

 

[oranjvoodoodaddy]

Most 32 inch tires only stand 31.5 inches tall.

The gear are you running should also be considered.

Got that part covered, just looking for some visuals.

 

[oranjvoodoodaddy]

Take the tires that are on your truck now, and from the center of the hub measure out 16" and draw a circle in chalk around your current tire.

Then take a step back and look at it.

I know its not what you want but it gives you perspective.

Thanks, I gave it a go and it helped me see. The 35s already show a bunch of wheel well, they measure 33.25, so going down 2 inches from where it's at probably won't look worse. It seems like 6 inch lift is meant for 37 or 38 inch tires.

 

[Shran]

This is not exactly what you're after since mine is a different body style... but I did have a Skyjacker 6" lift and 32's when this picture was taken.

 

[oranjvoodoodaddy]

Looks okay to me. I'll post a pic when i get home for comparison. Thank you, Shran.