Starting my 03 sas

[fredfx4]

Ok, finally received all my parts for the axles so its starting.
Front
Dana 44 early bronco 75
chromo superior axles
Arb air locker
4.88 superior gear set
12 or 14 inch coil-over
Ram assist

Rear 9 inch big bearing housing from the same early bronco
Detroit truetrac
31 spline chromo superior axles
Disc brake conversion (nearly finish)
ABS conversion

Quick pic of the 9 inch

P.s. The 44 in the rear is not mine its from a rubicon that getting a 6 inch teraflex kit

 

[ozziemo27]

any updates?

 

[fredfx4]

Going to finish the rear disc conversion tomorrow, so i should be able to start my 44 next week. My only big concern is that i had to wait for part a little longer then plan so i pass the dead season at my friends shop. It has to be done in march just dont no which week its going to be has they have a couple of big project coming in. There currently doing a 6 inch teraflex on a 2009 jeep jk and another one coming in next week plus a yj waiting for repair (extensive the frame all gone in the front) and one of them has to finish is personnel buggy.

 

[ozziemo27]

Sounds good, i'm looking forward to this build! subscribed.

 

[fredfx4]

the 9 inch is all painted, theres just one piece missing and its done. Have to oversize the center hole in my disc so it will fit the shaft.

The 44 waiting is turn

 

[fredfx4]

The 44 is nearly finish,

The abs ring are fitted to the hub and you can see the sensor on the spindle. Will see if its work when i first try the truck on the road, which seems to have been delayed for another 2 week cause of my coil-over.

By the way heres what there going on

 

[JeepRecoveryTeam]

why do you want abs.;? it sucks wheeling with abs

 

[fredfx4]

Just need to remove the fuse for offroad, ill have to go to the inspection once finish and dont want to get trouble just because the abs light is on are not there. Its my dd has long as it pass inspection if not im in trouble has i cannot have a tow rig and trailor due to lack of place where i live

 

[fredfx4]

Couple new pic the front is nearly over

 

[fredfx4]

The result

and the down travel

 

[wahlstrom1]

Looks Good! One question/tip though....Krawlers on 8's, I ran them like that too for a while but liked the profile much better on 10's, and I could run them at 30psi and still have them sit flat. Would help fill the flares out a lil too.....

Nice job though, trucks lookin awesome!

 

[fredfx4]

lol I found out after riming the tire. Probably the only part i dont like either on the truck. Ill do the summer with those but will try to find a set of 37 and wider rim with lest backspace to fill the gap next winter.

 

[bronco2guy]

Looks great1 Do you have anymore pics showing the track bar mount and did you go with a hyrdo assist??

 

[fredfx4]

Ill try to take one and yes i went with an hydro put know i need to find a knew pump the oem one has the right pressure but not enought flow. I find the steering to hard to turn. Saw somewhere that you can use a psc pump but cannot find the info anymore.

 

[fredfx4]

Flex shot