So I tipped her over today....

[ozziemo27]

woot, got my tailight (got towed into a tree a while back needed a new one) and my new mirror from partstrain.com, time for install, might be able to pop the door dent from inside with the panel off maybe, the damn window keeps tipping foward when i press the button to put it up so i have to guide it with my hand, maybe the mounts are screwy cuz of the dent, we'll see, i'll update when im done

 

[MountainMike]

Take some good pics of that mirror for me. I may end up getting one soon too.

 

[ozziemo27]

stuffs installed, i'll post pics later, studying for a final in 9 hours it looks good, i tried poppin the dent out from inside and all i did is dent it from the inside, whoops, lol, @#%! it, i dont care, im legal again

oh and mike, you joined like 7 months after i did and you have like twice as many posts as me, u talk alot, ahahaha

 

[Downey]

take your door panel off and push that dent out with your hand to start then use a rubber mallet to get the the rest of it out. you will never pull it with one of those suction cup things they are worthless. take your interior apart and pound out the dents from the back side. for the bed reach up under there and give it a good smack. you will never get them to go completed away because of the creases and there right on the body like but you wont have huge dents in your truck then.

 

[ozziemo27]

take your door panel off and push that dent out with your hand to start then use a rubber mallet to get the the rest of it out. you will never pull it with one of those suction cup things they are worthless. take your interior apart and pound out the dents from the back side. for the bed reach up under there and give it a good smack. you will never get them to go completed away because of the creases and there right on the body like but you wont have huge dents in your truck then.

already tried to, didnt work, i dont care

 

[bobbywalter]

So i was heading home from home depot after i got a new angle grinder after mine broke while working on my winch mount. So i gave it a little too much gas and lost control and slid in a circle and hit a ditch and the tire caught and she tipped. I'm alright, it was all at a slow speed but i lost my drivers side mirror and put some new dents in the cab/door/ and bed, oh well. And get this, the state boys didn't give me a ticket, just a warning, suprisingly. I know how to drive in the snow, and i know better but live and learn i guess before anybody preaches. Crappy cell phone pic but you get the picture, i'll post more carnage tommorow in the light. That was an F-550 pullin my truck back upright.

climbing out was fun... doors are heavy when they are being opened straight up, lol

ahhhhhhhhhhhhh yessss.....brings back memories of the first time i endoed my truck. glad your ok.

 

[MountainMike]

oh and mike, you joined like 7 months after i did and you have like twice as many posts as me, u talk alot, ahahaha

Well that boils down to two points. I randomly ramble on or my Ranger is such a POS that I'm always on here getting help.

Either way every post I make is pure GOLD!

 

[UrbanRedneckKid]

If you take your time you can make remove most dents if not make them look a lot better.
My bed used to me a mess, but about 4 hours with a few select 2x4s and a rubber mallet...

 

[UrbanRedneckKid]

But you are now obligated to buy the "Chicks dig body damage" sticker from Jim...

BTW, how did your 4x4 issue turn out?

 

[ozziemo27]

Well that boils down to two points. I randomly ramble on or my Ranger is such a POS that I'm always on here getting help.

Either way every post I make is pure GOLD!

Can..can i....have your autograph, sir?

But you are now obligated to buy the "Chicks dig body damage" sticker from Jim...

BTW, how did your 4x4 issue turn out?

i still need to do the front output seal done, to do that gotta get my friend to help me with his 3/4 inch electric impact , disassembled and reassembled the t-case and put her back on, 4x4 is workin fine now