Reverse Light Switch

[alwaysFlOoReD]

If access from the top doesnt work, I'd try removing the trans cross member and let it hang. Not sure what would hit the firewall so look carefully first.

 

[SenorNoob]

IIRC, the power should be there all the time. That switch is on the ground side. Might wanna look into it.

 

[cmcolfax]

IIRC, the power should be there all the time. That switch is on the ground side. Might wanna look into it.

Cool. Thanks. I'll chase some grounds too!

 

[cmcolfax]

Soooooooo...

One part of the mystery has been solved.
I found the connector.
Unplugged and wrapped in tape.

I have the battery disconnected and it's about to thunderstorm so I didn't plug it in to test it yet.

 

[pjtoledo]

one side of the wiring connector will be power. the other will read significant resistance because it is going thru the
bulbs then on to ground.
it should not be a dead short or open circuit/extremely high resistance.
you could measure a bulb to get an idea of what it should be close to.