• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Restoring the old Eight Nine Stang


More schtuff.....

The 5.0 pickup tube does not work here.... as you can see, there'a about 5/8" gap between the flange and the pump, not to mention to bolt hole are clocked differently...
20181012_175944_zpsyrmpejbb.jpg

You just didn't want it bad enough. You gotta believe.
 
LOL.... I really thought abound bending this thing to fit. But my Buddy talked me into getting the right one. I got it for 27 dollars shipped, so not too bad of a mistake.

Yoda could have made that thing fit though....
 
SN95 hubs on the front and two Ranger right side shafts in the rear will get you 5 lug.

Do you have a machine shop you use in Salt Lake, or near Salt Lake? I need to find one to take the bottom end to. Talked to Crankshaft Grinders... the guy sounded pretty knowledgeable until he asked me if it was a Windsor or a Cleveland after I had told him the motor was a 1996.
 
Well... this is where I got it to. I have way too much going on with the house to get it complete and in the Mustang.... so I tucked it away for a winter nap.



31487



31486
 
Welp... that motor is still sitting there. Since I've been on here last, I bought another Fox Body which is where the 351 will end up. My 89 is in too good of condition to go putting a 351 in. Here's a couple pics of my 89 GT (the white one) and the new multi-colored 88 GT, which is named "Frankie".
61096


61097


61098


61099
 
The new one definitely has "sleeper" written all over it. Don't change a thing on the outside!
 
Thank you.... I've been going back and forth on what direction to take it. I just did a 5 lug swap to it on Saturday. But the look is growing on me, for sure.
 
@shane96ranger

could you please check your signature line... it's a link to buy Cialis and Viagra at some UK pharmaceutical company.

did you do that?
 
Well.... now you have my attention.
 
It doesn't display when I view your profile or posts either, but I can definitely see it in your user details (via the moderator controls). I don't know why it's being hidden for some and visible for others. Browser settings smart enough to filter out junk links, perhaps?
 
Never mind.... I was looking for that specific wording. I did not see the "Buy Here", nor did I put it there. Very strange. I used to have some stuff down there, but definitely not that.
 
My apologies, but I am baffled as to how that got there. Is Rick still on here? I tried to do @RangerSVT but he didn't show up.

EDIT: OK, now it did after I submitted.
 
My apologies, but I am baffled as to how that got there. Is Rick still on here? I tried to do @RangerSVT but he didn't show up.

EDIT: OK, now it did after I submitted.

Neither are really all that active anymore.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top