Rear drive shaft

[KCB2]

OK i have an 89 B2. Have posted in here before about my cv style driveshaft and replacing it with a u-joint style. Well have finaly found one at a local junk yard. bought it for $23. Works like a champ. No more "CLANK CLANK CLANK" when i go down the road. Actually the old one failed at 70mph on the highway, luckily I was at my exit. So I locked my hubs and threw it in 4Wd and limped it the last few blocks to my house.

Well my question is I would like to get some spare u-joints for it and i am unsure of what to get. I do a lot of trail/mud/crawling with this SWB "BILLY GOAT". So if anyone could lead me into the right direction that would be great.

 

[country0001]

Pics would help.

 

[rusty7983]

What did the shaft come from? Or is it the explorer front shaft build?

 

[richard booth]

Spicer joints are best, bronco graveyard sells them for best price I found. I would get 10 dollar ones for spares, but if you make sure they stay lubed they live a reasonable service life.

 

[KCB2]

It came from a 89 b2

 

[country0001]

It came from a 89 b2

You can probably just go to your parts store and get some.

My first B2 had a factory u joint shaft and I got new ones from Autozone.

 

[KCB2]

I have been to the parts store and all they have is front axle, front drive shaft and at the t-case front shaft. have looked at all years.