• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

PlumCrazy's Build


It's still under the knife. 99 Ranger cab is mounted, EB44 is mocked up, 35" claws are mounted up, but it still needs a front clip or tube cage built/bolted up and it needs 100% rewired. But wiring should be easy, it has a 96ish base model dash and interior harness, so we just need the chassis and engine harness for a 95-97 4.0 truck

Still needs

Sent from my XT1080 using Tapatalk
 
How did you get the rims cleaned up so well where the outer and inner piece's meet? I have a couple sets of steel 8 lugs I want to redo this summer.
 
Sand blaster and and a brillo pad. They are far from perfect, but I think they are good enough for this POS

Sent from my XT1080 using Tapatalk
 
Went down to Wildcat Off-road Park with 036speed this past weekend. Had a good time, but probably won't drive 5 hours for it again.

Here are some pics....no particular order. Brad may have some more.

Had a whoops...
d08ea0e87dbe528c80bee7e1a398f4c4.jpg

b008b4464748f67e1bd96f10e83e70f6.jpg

e1b3b5042e030fd9f672c8df8916fa4f.jpg

160ffd1ef892ece7a3546e6c5eb3a271.jpg

f74f7b322b5c48c14d4748766ba05c45.jpg

a8ba095acccf606f62ea7142811fadc2.jpg

099a2344f750540428867a288183fe70.jpg

6a39c77b3b7dc494e7456ecc2b494292.jpg

582d06144ef10845f32f9365a706352b.jpg

8de1e7ec8d49ca6aac4dbac4eabc99d0.jpg

51d773727bf239f5e78b2119056576e1.jpg

7837893f8044c24fa969b53c3ca45937.jpg


Sent from my XT1650 using Tapatalk
 
Last edited:
Does the whoops call for 5pt harnesses now? And looks good. Did everything hold up the way you wanted it to?


Sent from my iPhone using Tapatalk
 
Aside from the flop it looks like fun.

Ever get much dirt in your precleaner?
 
No structural damage, just bent up some of the mounts for the header panel.

I probably won't worry about harnesses until I start wheeling without doors.

The stock structure and belts will hold for the slow speed stuff I'm doing.

Next rig will get some tube and probably a harness bar setup

Sent from my XT1650 using Tapatalk
 
Aside from the flop it looks like fun.

Ever get much dirt in your precleaner?
I dump it when it accumulates about 1/4" which takes like a year.lol. It does separate water from air though

Sent from my XT1650 using Tapatalk
 
I heard tell there isn't much tough stuff down there. I was supposed to go but finances were tight.

Sent from my SAMSUNG-SM-G891A using Tapatalk
 
I heard tell there isn't much tough stuff down there. I was supposed to go but finances were tight.

Sent from my SAMSUNG-SM-G891A using Tapatalk

It would probably be fun in a SXS or on a quad, but that's not my cup of tea. I like my glass and doors when its raining.lol

Im planning on an SOR trip this coming weekend if you care to join. I haven't been up there in a few years now. My buddy may drag the Mazda out too, but still up in the air.
 
It would probably be fun in a SXS or on a quad, but that's not my cup of tea. I like my glass and doors when its raining.lol

Im planning on an SOR trip this coming weekend if you care to join. I haven't been up there in a few years now. My buddy may drag the Mazda out too, but still up in the air.
Sxs ride local this weekend for me.
Followed by an 'extreme" test n tube for our va/wv trip.

Weekend off and then 1200 mile trip ending at ivy.

And I seriously doubt that I ever go to Southington, even if I am free.

It is almost a four hour drive for me and with that drive time I can be to the good stuff in West Virginia and Kentucky, not to mention Wellsville.

I would like to get a group together and go back to Slade

Sent from my SAMSUNG-SM-G891A using Tapatalk
 
No real update in the Ranger...Took it out the weekend following the flop and beat it pretty good taking the ole lady out on her first wheeling trip.

Ended up snapping a radius arm right where the original arm met the tube. The tube snapped... Appears to have been cracked for a while and just hanging on.

So I have new tube, bungs, and arms to build/redesign the front suspension.

Also picked up a new project/tow pig

It's an ugly but rust and dent free 89 F350. Drug home as a 460/C6 truck with engine issues. Ran on 4 cylinders with a good awful knock. Was hoping it was a timing chain....but then it locked up after driving about 100' down the driveway.

It snapped the #2 rod and threw it into the camshaft breaking that into 3 pieces
822c8d29fbb9a26639389dbb0aa75492.jpg

e028d39669ad37220bce2424b6785aed.jpg

2e892e07e612b5c63f167c91ba910b1f.jpg


So it will get a 460 long block and a ZF5....then I'll do the standard modifications. (Hydroboost, vinyl floor, tint, maybe 3/5 drop and 19.5s)

Here are some pictures...Blue on blue 97k on the Odometer. I already stripped the wrinkling tint and pulled the idiot sticks and chicken lights.

933adc11f552259e9bc7691f117ae8f9.jpg

382fe7b010d513bbb2696227e2086ca8.jpg

efdab23d919523b922ce6a24feb5bfa5.jpg

da9c56a6da35abfbb695d725b43df3b7.jpg

dbbc663d4fbf6b38dd12fd10a36a0d9d.jpg


For those of you following....Yes. I now have 4 blue Fords, 3 of which are blue inside and out.
7820ca16c06f9e2fba3f6aa2683fe9c1.jpg

And a blue Heeler.

Also stripped and polished some F150 Alcoas then converted my trailer to 5x5.5 to run them
3afbdc3be50da8b712777fde50481892.jpg

4761b4f8c6fd6394d45d9eec331b1c24.jpg


Sent from my XT1650 using Tapatalk
 
Looks like you have the parts to make a "hard luck trophy" for one of your events....lol.
What are the vertical arms coming off the ends of the front bumper for?
 
Looks like you have the parts to make a "hard luck trophy" for one of your events....lol.
What are the vertical arms coming off the ends of the front bumper for?
They are supposed to be lighted marker poles like a big rig to help locate the corner of the truck..I already pulled them off.lol

Sent from my XT1650 using Tapatalk
 

Sponsored Ad


Sponsored Ad

Special Events

Events TRS Was At This Year

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top