PlumCrazy
20+ Year Member
⭐Supporting Member
💻 TRS Socials
TRS Event Participant
TRS 20th Anniversary
2014 Truck of The Year
OTOTM Winner
Solid Axle Swap
TRS Banner 2010-2011
- Joined
- Sep 22, 2008
- Messages
- 4,724
- Points
- 3,101
- City
- Millersport, OH
- State - Country
- OH - USA
- Transmission
- Manual
Shafts are done. I extended the front just over 6 inches and knocked 6 off the rear.
I modified the trans crossmember to clear the front shaft.
I also made a mount to bolt on the rear case where the dampener used to be.
It will bolt up to the tab a added to the crossmember with a rubber mount of some sort.
I made the doubler shifter, but I forgot to bring home the t case shifter for the rear case.
High
Low
Id say it was a successful weekend.lol
Sent from my C771 using Tapatalk 2


I modified the trans crossmember to clear the front shaft.



I also made a mount to bolt on the rear case where the dampener used to be.

It will bolt up to the tab a added to the crossmember with a rubber mount of some sort.

I made the doubler shifter, but I forgot to bring home the t case shifter for the rear case.
High

Low


Id say it was a successful weekend.lol
Sent from my C771 using Tapatalk 2