• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

INFO Photos of Lifted RBV's With Different Lift & Tire Sizes


3" body lift

l_96545d476d2398fb0712c1cac9027a73.jpg

2000 Ranger XLT: Slight Torsion Bar Crank and 3" PA Body Lift on 33x12.5 Procomp ATs


l_e43d7b99dd1a36203942d00d1a53d75d.jpg

2000 Ranger XLT: Hellluva Torsion Bar Crank and 3" PA Body Lift on 35x15.5 TSLs

How long did it take to put on your lift and how hard was it to do it?
Im planing on buying a 3" body lift also.:headbang::icon_hornsup:
 
here's my 91 with a 5.5 superlift and 3" body lift sitting on 33/14.5/15s

SDC10800.jpg

plate.jpg
 
89 ranger

Here's my beast, 89 Ranger Custom 2" lift coils, Doubled leaf pack arched running 31's on 15x8.5 cragar rims.

P3120836-1.jpg


P3160845.jpg
 
Here is my 91 with the 4.0L weighing almost a 1000 lbs over the weight on my insurance after the Skyjacker 6"spring into 4" lift kit and Belltech shackles 2" Trailmaster lift block 1050 lbs leaf pack w/add a leaf on 33" TrXus M/T sits (yes I KNOW I have to trim the back of the fr wheel well openings)

2009_0314springs40033.jpg
[/IMG]

2009_0314springs40031.jpg
[/IMG]
 
just wondering

I got a 94 4x4 I want to put a 3" Body lift with some 33" tires does anyone know if it will work with little to no trimming? I didnt see this set up in this thread so if anyone knows that would be great.

thanks
 
I got a 94 4x4 I want to put a 3" Body lift with some 33" tires does anyone know if it will work with little to no trimming? I didnt see this set up in this thread so if anyone knows that would be great.

thanks

I'm pretty sure I posted mine... I had 33's on my '93 with only coil spacers (1.5-2" of lift), but that took a little trimming to the backs of the front fenders (I just pounded it back a little with a sledge hammer, and the fender flair covers it, so it looks untouched there), and a little on the lower corner of the bumper (liek a 1-2" triangle). I'd say with a 3" lift, you'd be fine, or would have trim off VERY little, with the right wheel dimensions of course.
Look in the tire and wheel section and you will probably find more info from people who did the same thing you are wanting.


EDIT: Look at post 80, on page #6. Post 85 page #6, has less than a 3" lift, and 33x13.5's. My pictures are on post 94 on page #7,
 
Last edited:
4 inches of lift with bald 31x10.5s

DSCN0493.jpg


the same truck with 33x12.5s and same 4 inch lift with fender trimming in the front and soon the rear.

DSCN0688.jpg
 
1996 ranger 4x4 4.0L 5R55E 1354E, 6 leaf, ranger/explorer combo, skyjacker 6" stage 1 lift, 1.25" spacer block in front, 3 BL performance accessories brand, 35" BFG MT's
100_3487.jpg

9808025.jpg
 
TrailerFun044.jpg

TrailerFun048.jpg


3" PA bodylift, torsion crank,33x11.50 nitto mud grappler, 16x10 wheels with 4.5 backspacing
 
Last edited:
94 Ranger 2wd with 2" coil spacers and Exploder leaves with an add-a-leaf.

235/75 15's in the front and 30x9.50 r15's in the back.

DSCN1768.jpg


DSCN1771.jpg
 
IMG_7157.jpg


IMG_7154.jpg


88 B2 - 2" coil spacer and rear add a leaf. Running 30x9.5/15 Goodyears. The only rub I get is the right front tire slightly rubs on the sway bar at full lock.

Derek

I've got that same lift. I got mine off ebay. My truck already had the stock STX highrider lift,plus 2" trailmaster coils and 3" blocks in back. I put the 2" coil spacers and the 2" add a leaf. I call it the po-man's lift. :P
 

Sponsored Ad


Sponsored Ad

Special Events

Events TRS Was At This Year

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top