New tools you've bought recently?

[Roert42]

The HF boxes are the only ones that sell a box for a reasonable price and have a 5” top drawer.

Huskey, Kobalt, Craftsman, all have shallower top drawers. Can stand up deep 1/2” sockets.

Also not a huge fan of the soft close toolbox drawers, they tent to make all my stuff slide to the front.

 

[Shran]

I've had my US General series 3 72" box and top cabinet for a little over 3 years now. I got the side box for it a little over a year ago. Other than a couple of broken drawer latches, I'm real happy with it. I expected that the drawer slides would be the first problem, especially on my sockets drawer but so far they've been fine. I probably use my tool box way more than the average home mechanic would... but much less than a professional tech.

My only regret is not having enough wall space to add either another side box or the locker like PJ did. Also I dig the white box... I prefer blue I guess but white would have been high on my list.

 

[scotts90ranger]

slide to the front with soft close or back with latches, whatever, both are annoying.

Come to think of it I do in fact like that tall top drawer on the bottom box, that's where my sockets are because I could stand 1/2" deep sockets upright...

 

[superj]

I n3ed to buy another 1/2 to 3/8 adapter for the breaker bar. Got two days out of the harbor freight one this time. It snapped right off while tightening lug nuts.


I previously had one of those black colored ones for an air ratchet. It last about a year but snapped off tightening stuff on my son's lift for his wrangler

 

[scotts90ranger]

I n3ed to buy another 1/2 to 3/8 adapter for the breaker bar. Got two days out of the harbor freight one this time. It snapped right off while tightening lug nuts.


I previously had one of those black colored ones for an air ratchet. It last about a year but snapped off tightening stuff on my son's lift for his wrangler

How about some 1/2 drive sockets? I've had best luck that way...

 

[Roert42]

How about some 1/2 drive sockets? I've had best luck that way...

Then he’ll just break his 1/2 x 3/4 drive adapter using his 3/4” breaker bar.

 

[Shran]

https://a.co/d/0bZGLEh2

^ that is the best 1/2 to 3/8 adapter I've ever used. I have a few of them but the one I usually grab has survived for quite a few years on a Milwaukee high torque impact.

 

[DeeRanger]

Just found this it he old garage. ?

 

[Rick W]

Just found this it he old garage. ?

I love it! I have one, but I think it’s slightly different. Mine is a ratcheting combo Phillips and straight screwdriver, with a little flip thing in the handle that changes the direction just like any other ratchet.

I worked in a hardware store as a kid, literally 55 years ago, and I have one from that time. I’ve actually filed both the flat side and the Philips side a couple times over the years so it grabs the screws tight. I chipped off a quarter of the flat blade, probably 10 years ago, and now I have a couple of more modern replacements, but it’s still my go to if I can get away with the chipped blade..

 

[superj]

How about some 1/2 drive sockets? I've had best luck that way...

I just never remember to buy half drive sockets till I actually need it and the wheels are off.

I did happen to find a half drive socket that fit the lug nut tool Wednesday so I could move the wheels around chasing a balance issue. I need to go to discount tire today and get the one tire rebalanced now.


When I got these tires new a few months back, one had no weight and they told me it was perfect and didnt need it. Its been fine but this rotation shows it has apparently worn enough to require a weight now as on the front, it hops slightly. On the rear, you dont feel it so I was able to make our trip to Omaha from corpus and will get it balanced today.

This was our trip.