Need diagram of original headlight wiring to new switch connector...

[MPD280]

My old headlight switch burned up. Replacement did too, after I tossed old switch that I used to mate up wires. Anyone have a pic of the correct wire placement? Thank you.
97 with 2.3l...

 

[Earl43P]

I don't have a picture.....

Main light switch
Looking at connector, one side has two pins, the opposite side has three pins.

I will tell wire colors from top to bottom.

3 pin side:
top pin (#1) is empty
middle pin (#5) is TN/WH (hot at all times)
bottom is LB/RD (#9) (courtesy lamps)

next column of 3 pins:
top is (#4) RD/YE (power in Start or Run)
middle (#8) OG/BK (4WD Indicator)
bottom (#11) empty

next column of 3 pins, which is next to the column with only two pins:
top is (#3) WH/BK (Parking Lamps)
middle is (#7) BK (Ground)
bottom is empty

Last column has two pins:
Top (#2) is RD/YE (Headlamps)
Bottom (#6) is DB/OG (Hot at all times)

This is from the 2000 EVTM. I have no clue whether all those colors will match your year, but the function of each wire should be the same. They haven’t changed that switch in many years.

 

[MPD280]

Thank you.
Is this the orientation you are describing, minus the helpful wires?