- Joined
- Jul 13, 2018
- Messages
- 60
- Points
- 601
- City
- Austin, Texas
- Vehicle Year
- 2004
- Transmission
- Automatic
[UPDATE 19 July 2018-- we have a partial winner with the 3 screws extracted!! Winner is a Husky microratchet https://www.homedepot.com/p/Husky-1-4-in-Drive-Microdriver-Set-16-Piece-HMDS16PC/302905070]
Hello!
My first post could not get me what I want:
Removal of fuel rails on my 3.0L 2004 ford ranger
I estimate only 1.4 cm of clearance inside a hole and the valve covering bolt on the outside.
How do you remove a valve covering bolt?
See pictures to size of measurements.
I have tried: (8mm bolt) valve cover bolt in way
A)Head Socket only
B)Universal joint (no torque)
C)1/4 in x 8mm socket bit
No help: too dissimilar
http://www.therangerstation.com/how...skets-fuel-rail-gaskets-lower-intake-gaskets/
Thx in advance,
JC Magras
Hello!
My first post could not get me what I want:
Removal of fuel rails on my 3.0L 2004 ford ranger
I estimate only 1.4 cm of clearance inside a hole and the valve covering bolt on the outside.
How do you remove a valve covering bolt?
See pictures to size of measurements.
I have tried: (8mm bolt) valve cover bolt in way
A)Head Socket only
B)Universal joint (no torque)
C)1/4 in x 8mm socket bit
No help: too dissimilar
http://www.therangerstation.com/how...skets-fuel-rail-gaskets-lower-intake-gaskets/
Thx in advance,
JC Magras
Last edited:
