My SAS Ranger

[Ford78]

Just a little update, i redid my front rear shackle mount last week. Been wanting to redo this for a while now. Got the frame outriggers from ruffstuff. Got most of my materials from them guys and they are the best. I also fixed my shackle angle while i was at, which gave me alot better ride.

 

[terry slaney]

does anyone know the part numbers or where i can buy the steering shaft ujoints and the tubing for the shaft??

 

[Ford78]

Ill look up those part numbers for u tomarrow when im off. sorry i havent pm u back, been at work.

 

[Ford78]

Heres the part # that i used for my steering shaft. Hope this helps.
FR1781
Is the u-joint i used on the cab side. Its a
3/4 x 3/4 DD

FR1781
Is the u-joint that i used on the toyota steering box side. It is 1" DD x 11/16-36 spline

Part #450024 is the 24" telescopic shaft. one side is
3/4 DD and the other side is 1" DD. I did have to trim the shaft a little.

FR1810
Is the support bearing that i used to support the shaft.
I think i got everything from Jegs, but u might be able to get the part cheaper elsewhere.