"Mini Me" Low COG B2 Crawler/Jumper Build

[Dugan]

Coated the exo in STEELIT, weldable paint.

B2 got sent off for Vinyl windows to be made for the 3 rear windows.

Started painting the jambs with my final color. Turquila Monstaliner.

 

[Dugan]

 

[Dugan]

Sanded and coated chassis in STEELIT.

Got swing steering powdercoated.

C clip eliminator.

New beadlocks.

 

[Dugan]

Center console time.

 

[Dugan]

 

[sgtsandman]

Hell of a lot of work there!

 

[alwaysFlOoReD]

Very nice job!

 

[bobbywalter]

First


I expect that challenger back home in MY garage by midnight young man.


Have no idea why you think it should be out there....




I definitely would have used a rear 60 and a front ttb 44 to avoid notching the frame.

The exo being removable is superb! Wow.

I would have put it in the fenders.... But that's some good work.

Yup need more tube over the forward roof though and some sheet

 

[bobbywalter]

You can use a 31 spline slip yoke from a 2wd trans for the passenger side.

Cut and sleeve to extend.... Or if you went to a 50 pig or 44...with the 50 yoke...it can be a 1350 joint.

 

[Dugan]

First


I expect that challenger back home in MY garage by midnight young man.


Have no idea why you think it should be out there....




I definitely would have used a rear 60 and a front ttb 44 to avoid notching the frame.

The exo being removable is superb! Wow.

I would have put it in the fenders.... But that's some good work.

Yup need more tube over the forward roof though and some sheet

Challenger is my buddies. I was fabbing up some stuff for his hellcat swap haha

I had these axles mostly already setup snd i wanted a small track width

Im gonna do a bar across the lower Windshield snd then windshield bars.

Exo was removable only till it wasnt haha.

 

[Dugan]

You can use a 31 spline slip yoke from a 2wd trans for the passenger side.

Cut and sleeve to extend.... Or if you went to a 50 pig or 44...with the 50 yoke...it can be a 1350 joint.

I modified the width of the axles and trimmed the splines. It fits just perfect at full droop and at full bump. No binds and no chance of coming apart. Took a little bit. But ill add your info to my notes for next time

 

[Dugan]

Photo dumping, never realized I didnt keep this updated.

\

 

[Dugan]

 

[Dugan]

 

[Dugan]