I want to assemble new intermediate steering shaft.

[bobbywalter]

Steering wheel will be off 90* IIRC if you don't do some cutting and welding.

I snagged one out of an XJ, kinda hemmed and hawed on it and found a better one out of a second gen that only used one rag joint.

Really worthy of a write up to preserve part numbers and info for the future:

How To Post Articles To Be Added To The Site | The Ranger Station

Post proposed article here:

Submit A Technical Article (Not a Help Forum) | The Ranger Station

jeep unit dont make mine off 90

 

[85_Ranger4x4]

jeep unit dont make mine off 90

Because of your different steering box?

The XJ shaft I got is shown on the bottom.

 

[bobbywalter]

yj style with ranger box....later style with over rail and saginaw gm boxes

 

[bobbywalter]

there are several variations with the ttb/tib rangers and more with sla in regards to how it interfaces through the firewall.

all mitigatable with junkyard parts one way or another.

 

[85_Ranger4x4]

there are several variations with the ttb/tib rangers and more with sla in regards to how it interfaces through the firewall.

all mitigatable with junkyard parts one way or another.

I found a brand new looking one out of a second gen, lost my ambition and just went with it lol.