I broke my hydraulic clutch line in my 87 b2

[Broncojumper87]

Long story short I broke the hydraulic clutch line right at the fitting that goes into the slave cylinder. searched the net wasn't able to find a new replacement. This is my dd so I need to figure something out quick. I was hoping maybe someone had one laying around or had one on a parts truck or something. Any and all help is greatly appreciated thanks in advance.

 

[deathstar182]

I would just look at a junk yard, that's what I did when I broke mine, I just grabbed the resevoir and line filled in with new fluid and threw it in

 

[Broncojumper87]

I need the line from the master to the slave and the junk yards around here dont really have alot of b2s

 

[deathstar182]

pull it from a ranger that has the same 5 speed trans you'll be able to tell the trans by the shifter, if it looks the same you're probably safe

 

[Broncojumper87]

I will try to get off early enough today and stop by one that's on the way home.

 

[Broncojumper87]

Well so far no luck at my local yards there's got be someone on here who can help me out really need to get my b2 moving under its own power again.

 

[adsm08]

Have you tried these guys?

http://www.thomasnet.com/kansas/hydraulic-hose-39231204-1.html

 

[Broncojumper87]

I haven't really thought of having one made only problem I can think of well 2 maybe is price I feel like it would be stupid expensive and I dont have the original line anymore it got thrown away on accident I believe so I don't have the fittings that go into the slave and master cylinder.

 

[adsm08]

It's worth calling them at least. I have been able to get things like hydraulic lines and springs made without the originals available to be copied. Sometimes those places will have specs on file.

 

[Mylesofsmyles]

You look on RockAuto?

They seem to have 'em for all gen's

 

[Broncojumper87]

I checked the web site wasn't able to fond one for and 87 they do carry them for 88 and up but not for anything older that I could find. I ended up ordering one from ford it should be here tomorrow.

 

[AllanD]

The line you need was only used from 1985 through the end of the 1987 model year.