Holley 2300 EFI kit

[EVOrider]

Anyone here familiar with the Holley 2300 EFI kit? It says it works on the Mustang 2.8L v6.

I would consider going that route if someone here is familiar with that setup.
Thanks

 

[JoshT]

I'm not, but if you do it please let us know how it goes.

I've got a 2.8L looking for a future home, but it's got an Offy 4bbl intake. If I do put it back into service I'd like to do EFI, so I'm wandering how it would run with the larger EFI unit or if I should go back to a 2llb intake and the smaller unit.

 

[PetroleumJunkie412]

Anyone here familiar with the Holley 2300 EFI kit? It says it works on the Mustang 2.8L v6.

I would consider going that route if someone here is familiar with that setup.
Thanks

2.9 guy here, but very interested as well. My 2 9 is megasquirted, and from experience, standalone beats everything else. Very interested in this.

 

[Tim russell]

Anyone here familiar with the Holley 2300 EFI kit? It says it works on the Mustang 2.8L v6.

I would consider going that route if someone here is familiar with that setup.
Thanks

This is the offer 4bbl to 2bbl adapter with a sniper 2300 haven't started it yet. Have to modify the valve covers .
1929 model a truck. Mustang 2 running gear.
2.8l v6 Wiesco forged pistons .030
Schneider turbo cam.

 

[PetroleumJunkie412]

This is the offer 4bbl to 2bbl adapter with a sniper 2300 haven't started it yet. Have to modify the valve covers .
1929 model a truck. Mustang 2 running gear.
2.8l v6 Wiesco forged pistons .030
Schneider turbo cam.

I NEED MORE PHOTOS NAOUGH

 

[Tim russell]

This or something else.
Also got a distributer from performance distributor springed and brass bushing.

 

[PetroleumJunkie412]

@85_Ranger4x4

This.

 

[PetroleumJunkie412]

This or something else.
Also got a distributer from performance distributor springed and brass bushing.

This is art.

 

[Tim russell]

Retro in take fuel pump bulkhead . Holley fuel system.

 

[ford4wd08]

Retro in take fuel pump bulkhead . Holley fuel system.

Your sir should start your own build thread for the 2.8. A lot of folks including me are interested in what you have done and how it will work out.

 

[Tim russell]

Hopefully this week it will get fired off. And thanks. I'll post a video of the stating of it.

 

[Tim russell]

So got the valve covers modified and painted and installed got my inline fuel pressure gage mocked up and my radiator recover tank bracket built and instaled

 

[Tim russell]

Ok so an update srry its been awhile so got the truck started had it idealing at 15-1800 rpm to break in the engine all was good but about 7 mins in it blew the bottom radiator house. So a few things to address but she gonna be driving this weekend.