high lift spring swap

[sfwjesse]

I bought some high lift coil springs 1.5-2" lifting with camber bushings for my 88 B2 4x4. They have been in for a while, but now i am going to be getting rid of it because i picked up a 93 ranger 4x4 4.0L.

My question is...can i swap springs. According to JC Whitney, my current lifting springs are P/N ZX944167PF, and the ones for the ranger are ZX944168PF. Is there a difference in coil height between a 88 RBV and a 93?

 

[Sunk]

Yeah, you can swap the springs between the two. The camber bushings won't fit though, as the BII has a D28 and the Ranger has a D35.

 

[sfwjesse]

Ok that makes sense. Id rather pay for bushings then 230 for those damn springs again haha.

 

[sfwjesse]

Just an update here so people dont search this someday and get misled. The superlift springs for the B2 may FIT on the ranger, but they are basically equivalent to stock 4.0 ranger springs. The part number for the coil spring on the super lift website is 122 for B2, 128 for newer ranger......different for both vehicles, and when you put the coils side by side it is obvious they are almost exactly the same thickness and length.