hi im mark

[dennison]

have some questons i put a 5.0 in a 2001 ford sport trac.it runs but a need a digram on oil pressure switch. how to wire transduser in for speedo. if any one can help it would be grate.

 

[bobbywalter]

What system did you use?

Wire should be there.

 

[bobbywalter]

What year 5.0 and what year wiring/pcm?


2001 is a x-over for wiring iirc...really every year from 95 it seems like...

If it's from a 2000 or 2001 explorer it should be plug n play.


Or did you swap to a manual trans

 

[PetroleumJunkie412]

 

[Curious Hound]

 

[dennison]

What year 5.0 and what year wiring/pcm?


2001 is a x-over for wiring iirc...really every year from 95 it seems like...

If it's from a 2000 or 2001 explorer it should be plug n play.


Or did you swap to a manual trans

 

[sgtsandman]

 

[Dirtman]

 

[bobbywalter]

st might have the hec....did not think they had that till 04. its not really true hec...just that the pcm gens the speedo signal.



so stacking gems may be easier or use a ranger rabs. if you are using forscan its probably easier to stack gems.



i just came back last week....but i would have picked up one of these if its worth it to you.

http://www.dragonaero.com/SpeedChangerPage.htm

 

[Ranger850]

Welcome to TRS