Help! 2004 Edge sags in the front.

[paulnola]

My 2004 2wd Edge no longer sits up level (or close to level) like a 4x4 as it should. I started to notice this after the engine was replaced a few years ago. It has gradually sagged lower. Looking at it from the side, it looks higher in the back and lower in the front. It used to sit level.

I tried adjusting the torsion bars but am not sure if I did it correctly. It does not appear to have helped. I also plan on replacing the shocks soon.

I parked next to another Edge and compared how they sat. Min looked wrong. I took a pic but of course can't find it now. I'll come back and post it when I do.

Any suggestions would be appreciated!

 

[pjtoledo]

here is how to measure front ride height, factory specs listed.
then you can determine sag, or set it how you want it.

'01 Torsion Bar Stock Adjustment | The Ranger Station

 

[Uncle Gump]

They do have bars with different spring rates also.

They also just plain wear out.

 

[rubydist]

My experience is the torsion bar adjusting bolts like to back off, and that makes the front lower.

 

[paulnola]

Thanks guys. I'll check out the specs and adjust the torsion bolts accordingly. Will report the changes when done, but it might be a while since we're still getting settled in and I don't have access to a garage or workspace at the moment.