-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Hello and engine question
- Thread starter don68
- Start date
Welcome to TRS 
You have a Lima engine, also called Pinto engine, first used in 1974, in a pinto, lol.
1995-1997 2.3l would be plug and play
Can't use 1994 or earlier, crank sensor issues
1998-2001.5 are stroked 2.3ls so 2.5l and can be used, but, you will need to swap your current intake manifold with injectors over to the 2.5l
1998 and up Rangers used different fuel system
2.3l SOHC and 2.5l SOHC used the same heads so parts swap over fine, all engine parts are the same, the 2.5l just had different crank and longer connecting rods for longer stroke
2.5l was used until mid 2001, then replaced with the Duratec 2.3l DOHC engine
So 2001 Ranger could have either engine
You have a Lima engine, also called Pinto engine, first used in 1974, in a pinto, lol.
1995-1997 2.3l would be plug and play
Can't use 1994 or earlier, crank sensor issues
1998-2001.5 are stroked 2.3ls so 2.5l and can be used, but, you will need to swap your current intake manifold with injectors over to the 2.5l
1998 and up Rangers used different fuel system
2.3l SOHC and 2.5l SOHC used the same heads so parts swap over fine, all engine parts are the same, the 2.5l just had different crank and longer connecting rods for longer stroke
2.5l was used until mid 2001, then replaced with the Duratec 2.3l DOHC engine
So 2001 Ranger could have either engine
Last edited:
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
