For my 5.0 peeps...

[kamshaft]

truck looks bosss! love the wheels! and paint job i also did the cobra brake setup along with my 347 which u probably seen hoping to get mine goin here soon

 

[hoosier1104]

You can achieve the same results on the spark wires with zip ties. I believe that is how mine are done. The shield however would hide my Torque Monster headers and I like the look of them. Teddy, as usual man, excellent work.

 

[Teddyzee]

Thanks for the comments, guys. I'll try to get some more recent shots to share.

 

[shane96ranger]

You can achieve the same results on the spark wires with zip ties.

That's what I did. I like the way it looks.

 

[Kingkoala92]

questions...

first off teddy your truck looks amazing great job!
I'm new to the whole form seen I'm sure this is been said and other places but got some questions
Im getting ready for a 5.0 swap in my 91 ranger
I have a complete 94 5.0 t5 musting im using as a donor for the swap
what are the best motor mounts to use? iv seen fox body convertable moynts and swap mounys..
what did you use?
also will the try yanifold work with my heads?
thanks in advanse and again love your truck!!

 

[Teddyzee]

Thanks!
The mounts from your '94 Mustang would be perfect, it's what I used. The '94/'95 Mustang mounts are the same as the Fox bod vert mounts.
The Tri-Y headers will fit your heads, but you may need to do a little bit of grinding on your bellhousing. The '94/'95 bellhousing locates the starter and clutch fork at a lower angle than the Fox bell/trans, so they come close or touch the headers.

sn95 on the right

 

[Teddyzee]

Guess I can toss some updates here. In the past year I swapped the seats, they're mounted on power Explorer tracks, painted the interior trim, and installed my "custom" Sport Trac cluster.
Finally finished my hood and painted/installed it and the tonneau. Stock Ranger hood that I grafted a Fox body cowl to.
Swapped the GT40 tubular intake, found a cover plate for it... Not in the pics, but I have a new C&L 76mm MAF housing and 24lb injectors...
May be other stuff, but here are some pics:

PRND21, lol...

 

[Kingkoala92]

thanks man good to hear!
iv got a couple more questions but I dont want to hijack your post
would it be better for me to email you?

 

[Teddyzee]

Hey guys, nice to see that this site is still around.

My Ranger is still working well, 12-13 years after I swapped it. Stumbled to this page via google.
Thanks to everyone who helped when I was building!

 

[85_Ranger4x4]

Hey guys, nice to see that this site is still around.

My Ranger is still working well, 12-13 years after I swapped it. Stumbled to this page via google.
Thanks to everyone who helped when I was building!

He lives!

Glad to hear both you and your truck are still doing well.

 

[maximized98]

Do you have any interest in doing the swap in mine? Please!!!!!!!!