Duras park ignitions

[allpau2thou]

The 302 I'm putting in my ranger might have a duraspark II, but it is currently full injected and I plan on changing it to carbureted. Will The ignition still work in my 91' which was originally a 4.0L?

 

[85_Ranger4x4]

You will have to hardwire it all in, will not be a plug and play at all. It is still a fairly simple hookup though.

Don't forget to watch the dizzy gear material, roller cams need a steel gear. '85 Mustang is a common application.

As far as converting an EFI truck to carburation, it might be easier to just leave the engine fuel injected.

 

[allpau2thou]

Wanted to keep it Fuel injected so it could be turbo charged bu there is some major problems with the wiring so I was told to convert it to carbureted would actually be alot easier and cost about the same. I also did some reading and figure finding a duraspark would prolly be difficult where I am and decided to price out what I needed from MSD. Think I'll just get from them. On a side note... Is it possible to find out if there is any trs members in my area?

 

[v-8power]

I know of one guy who is from Hawaii. Have not seen him post in a long time though.

EDIT: 302splash is his screen name