Door lock problem


Badamski

10+ Year Member

Joined
Jan 17, 2015
Messages
1
Points
1,501
Vehicle Year
1994
Transmission
Automatic
Hello, I bought a 1999 ranger 4.0 4wd 5 speed. Love it, so I went to put an alarm on it and the guy says my door pin isn't working. (I know, I can't find a door pin in the manual either.) the automatic lock does not unlock just locks. What do I need to do to fix this? Please help!!!! Door lock cylinder sound like what I'm after?
 
Not sure what a "door pin" is. Power locks that lock properly but don't unlock with the power function is almost always a bad actuator, if it is only a single door. It's easier to lock the door than unlock, because you push up to unlock. It's a gravity thing.

If it is both doors I would suspect the unlock relay is at fault.
 
Does your dome/courtesy light work? Ford uses a daffy powered pin that seems unique to the rest of the industry that seem to prefer ground fired pins.
 
there's a pin-style door ajar switch on my 97... basically sits below the latch and when it is open, the switch grounds out...
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

TRS Ranger Sponsors


Product Suggestions

Back
Top