- Joined
- Aug 19, 2001
- Messages
- 10,882
- City
- So. Calif (SFV)
- Vehicle Year
- 1990
- Engine
- 2.9 V6
- Transmission
- Manual
- Tire Size
- 35x12.50R15
For awhile.
They love to do this /--o-\ when they get some age on them. Mine does it with the factory stuff, I need new put in new springs, then I have to try to find somebody that knows how to align it.
That is my #1 qualm about the TTB. A close second is it makes a handy snow/mud plow.
IMO the only advantage to the TTB is it came there from the factory, there is no reason I would rip out a solid axle and put in a TTB.
Trying to find an alignment person who's actually competent can be a challenge sometimes... I certainly agree (I strongly suspect it's a lack of proper training given in regards to Twin-Beam suspensions).
Instead I just do it myself, avoiding that whole hassle. If the tires are simply getting like /--o-\ , stick a couple washers under the lower coil perches. Done deal. Make sure it's not because your bushings are shot first though.
As for ripping out solid axles for TTB, it's been done... I know of both a '79 F-250 and a Jeep Grand Cherokee I saw over on Race-Desert.com or another site like that that had D44 TTBs. I seem to recall seeing an '80s Chevy with one too (had a Ford t-case (208 I think?) swapped in as well). If you're into jumping and going fast, a solid axle with it's unsprung weight can be a considerable handicap.