Aceja75
New Member
99 ranger 4,0 replaceing the lower control arms , Passenger side the lower control arm bolt to the rear hits the exhaust pipe . Unable to remove, driver side went smooth any ideas
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
99 4.0 lower control arm rear bolt
- Thread starter Aceja75
- Start date
-
- Tags
- lower control arm
Aceja75
New Member
2wd
how much room do you need?
3 options, or rather my 3 best guesses
remove the exhaust pipe, use as a last resort. I'm in the rust belt so I'm slightly biased against touching a rusty exhaust bolt.
raise the pass side engine, loosen 2 mount bolts and jack it up carefully
have a new bolt available? cut the head off the old and pull it out backwards
3 options, or rather my 3 best guesses
remove the exhaust pipe, use as a last resort. I'm in the rust belt so I'm slightly biased against touching a rusty exhaust bolt.
raise the pass side engine, loosen 2 mount bolts and jack it up carefully
have a new bolt available? cut the head off the old and pull it out backwards
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Latest posts
-
-
-
2.3L ('83-'97) High intake temps (radiator fan shroud?)- Latest: scotts90ranger
-
-
-
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
