351C in 1991 Ranger headers?

[HOT_ROD_CAR]

I want to upgrade from stock manifolds to headers. What headers or a header kit where you route the tubes and weld them yourself will work with a 351C in a 1991 Ranger? Anyone?

I emailed JEGS and the response is shown below...

"Thank you for giving Jegs the opportunity to assist you with your technical question. I have checked, and we do not have headers to fit this swap. I do not know where to tell you to look from here. If you have any further questions, please feel free to contact us.
Thanks Again, Technical Sales Representative 800-345-4545 ext # 639"

Also looking for info on where to buy a C4 transmission.

 

[v-8power]

You could send a e-mail to total performance and ask them.
totalperformance@ameritech.net

They dont make them but they might have some helpful info.

 

[baddad457]

You might also try a set of Sanderson shorty's. www.sandersonheaders.com C-4's are everywhere, just depends on what you want and how much you want to spend.

 

[mentalbreakdown00]

I am going to take a set of 351C headers from something like a mustang and chop em up and buy a pre bent tube kit and tack em all together, when it's finished have it all tig welded

 

[chvlfrk]

My 02>>>

I am going to take a set of 351C headers from something like a mustang and chop em up and buy a pre bent tube kit and tack em all together, when it's finished have it all tig welded

========================================
^^^^^That's probably the best idea, as that's what I'm gonna do for my 402'd 99 XLT......I've bought a set for a Chevelle that I've gotta a guy in Chattanooga that will adaptem to my Ranger, as I learned the HARD EXPENSIVE WAY on my 360'd 94 (spent $280 on various headers that I cut up and they still wouldn't work), woulda been cheaper to of had a set build professionally.............Just some "food for thought"!