1989 Ranger 2.9 no crank no start.

[Tmart]

I have a 1989 Ranger with a 2.9 L. Will not crank with the key, but I am getting signal through the S terminal on the solenoid. I can jump across solenoid, and it will crank, but will not start. Solenoid has good ground to the fender. Clutch position center has already been bypassed so that’s not the issue. Tried running a ground from the battery to the block didn’t help. As I said, I have 12 V to the S terminal but, when checking with a multimeter and turning the key, I am getting nothing on the starter side of the solenoid, which is new.

 

[rusty ol ranger]

I have a 1989 Ranger with a 2.9 L. Will not crank with the key, but I am getting signal through the S terminal on the solenoid. I can jump across solenoid, and it will crank, but will not start. Solenoid has good ground to the fender. Clutch position center has already been bypassed so that’s not the issue. Tried running a ground from the battery to the block didn’t help. As I said, I have 12 V to the S terminal but, when checking with a multimeter and turning the key, I am getting nothing on the starter side of the solenoid, which is new.

Just cause its a new solenoid dont mean its a good solenoid

 

[SenorNoob]

Agreed. That's really the only thing it can be from your description.

Which really sucks cause every parts store at least in my town now has a sign on the door. "All electrical parts sold as is. No returns."

Not sure how enforceable that is since they offer extended warranties on alternators...

 

[Tmart]

This is the second new one I have tried. But I don’t know what else it could be.

 

[Silas Mc]

Did you jump the solenoid with the key in the ON position?