I've acquired 4 new cooper discoverers 225 70R 16 for $50 apiece and would like to put them on my 01 4door 4X4 ranger and I'm having an issue finding wheels, any suggestion? My problem is backspace and offset, don't know what they should be for a 16" rim. I'm looking at these but not sure if they'll fit. https://www.summitracing.com/parts/vsw-85h6765ns#overview
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
16" rims for 2001 4X4 ranger
- Thread starter TJS1011
- Start date
Uncle Gump
Boomers gotta Boom
TRS Forum Moderator
TRS Event Staff
⭐Supporting Member
TRS Event Participant
TRS 25th Anniversary
VAGABOND
GMRS Radio License
- Joined
- Sep 17, 2018
- Messages
- 16,527
- Points
- 601
- City
- Ottawa IL
- State - Country
- IL - USA
- Vehicle Year
- 1986
- Vehicle
- Ford Bronco II
- Drive
- 4WD
- Engine
- 2.9 V6
- Transmission
- Manual
- My credo
- Lead follow or get out of my way
The stock wheels typically have a 4.5 inch backspace. So the above mentioned wheels at 4 inch backspace will push the wheels outward .5 inch per side. Those are also 7 inches wide which is the factory 16 inch wheel width.
Those are very close to a 16 inch factory wheel. So I would say they will fit fine.
Those are very close to a 16 inch factory wheel. So I would say they will fit fine.
Sponsored Ad
Sponsored Ad
Special Events
TRS Events
Member & Vendor Upgrades
Become a Supporting Member:
Or a Supporting Vendor:
Recently Featured
TRS Latest Video
TRS Merchandise
Follow TRS On Instagram
