1 Ton YJ Crawler build

[ryan]

i do not like the corvette fuel filter/regulater setups. too much variation with the aftermarket units.

just use the fass regulators when i can.


i forgot how nice your rig is.

This is a speedway branded one. Not sure what to expect - my buggy had a fass style setup, but it had all that high dollar racecar ultra 4 stuff that was a pain to service too. Hope this one works, and price wise I can keep a spare and swap it out in 5 mins on the trail

 

[ryan]

Snug. But not TOO snug. Looks great.

I was hoping to mount my steering reservoir in the drivers fender area on the radiator, but that might be a little dicey now with trying to fit an intake. Should have just enough room to put it on the strut tower, but that's a problem for future me

 

[ryan]

Took me a bit to get the hang of the stainless lines vs the nylon braided. Kept fraying them out, eventually used electrical tape pulled really tight with more wraps than I thought I should have, but it worked really well holding it together while I cut it with a grinder

 

[ryan]

Fuel system is all together now except for one AN-8 fitting I needed for the return line

 

[ryan]

Next up is getting the wrecked steering box out and the Atlas a new input shaft. All the wiring to finish up